Can't get spark from my cpr setup

Hondata CPR (Coil Pack Retrofit) support
Post Reply
jaekgood23
Posts: 2
Joined: Sun Jul 20, 2014 8:43 pm

Can't get spark from my cpr setup

Post by jaekgood23 »

I'm having issues with getting my cpr to fire also.....I went through all the trouble shooting issues with no success....get all the correct lights just as they say I should and I tried a brand new coil pack with no success..i also tried cleaning the ground on the thermostat to make sure....yes I have a rectangle ecu with the q37 installed...I have tried more then one ecu...even had a performance shop wire it up for me.....pleasseeeee help!
User avatar
Hondata
Site Admin
Posts: 10434
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: Can't get spark from my cpr setup

Post by Hondata »

In the past all the CPR problems have come down to spark plugs, distributors, ECUs and wiring.

The first step is to tell us what spark plugs, ECU, software version & S300 serial number you have. Is the distributor genuine Honda?

Has the wiring been altered in any way? Can you post photos of the CPR power, ground & ECU connection, then the CPR main ground and the distributor connector.
Hondata
Post Reply