Auto gearbox 3 - 4 - 5 gear lag
Auto gearbox 3 - 4 - 5 gear lag
Seems that users with Auto gearbox has lag going with 3 or 4 or even 5 gear. Doug maybe you have ideas why this happens ? 1st and 2nd gears don't have these problems.
- Attachments
-
- 19.12.12 Morning Way 2 Work - S(1).fpdl
- (1.95 MiB) Downloaded 361 times
-
- Short Run in 3rd to Redline(2).fpdl
- (927.14 KiB) Downloaded 360 times
-
- lag
- 6400.PNG (67.84 KiB) Viewed 6023 times
Known as Vaikis_
Re: Auto gearbox 3 - 4 - 5 gear lag
My friends has same problem.
avtomat gear
tiptronic gear
avtomat gear
tiptronic gear
Cr-v RD8+K24A2turbo+Kpro V4 prb+NPR3/6Speed+ТС+ HFS4 v3.2.
DynoWheel = 472kW / 589 N.m
HRX One Mile Challenge = Max Speed 282km
Known as Sniper
DynoWheel = 472kW / 589 N.m
HRX One Mile Challenge = Max Speed 282km
Known as Sniper
Re: Auto gearbox 3 - 4 - 5 gear lag
maybe it's due torque convertor which Auto gearboxes have ?
Known as Vaikis_
Re: Auto gearbox 3 - 4 - 5 gear lag
From what the boys and girls at flashrpotuning.com have confirmed, and you should have noticed this yourself, is that it happens at vtec crossover. When the vtec mechanism turns on, needing oil pressure to move that "pin" inside the Rockerarms, there is a slight lobe. They said it would not be a problem to have that 'ironed' out. I will have to buy an e-tune from them, but at the moment, I am not finished installing parts, so I will have to wait, to get the complete tune job.
This happens to me too in 3rd and 4th, also in ss mode, but not as noticeable.
Mounty
Check out my vid on youtube... on the dyno... vtec lobe is audible... http://www.youtube.com/watch?v=SEouSBMSKP8
This happens to me too in 3rd and 4th, also in ss mode, but not as noticeable.
Mounty
Check out my vid on youtube... on the dyno... vtec lobe is audible... http://www.youtube.com/watch?v=SEouSBMSKP8
Re: Auto gearbox 3 - 4 - 5 gear lag
this is not due VTEC crossover, this is two different things.Mounty wrote:From what the boys and girls at flashrpotuning.com have confirmed, and you should have noticed this yourself, is that it happens at vtec crossover. When the vtec mechanism turns on, needing oil pressure to move that "pin" inside the Rockerarms, there is a slight lobe. They said it would not be a problem to have that 'ironed' out. I will have to buy an e-tune from them, but at the moment, I am not finished installing parts, so I will have to wait, to get the complete tune job.
This happens to me too in 3rd and 4th, also in ss mode, but not as noticeable.
Mounty
Check out my vid on youtube... on the dyno... vtec lobe is audible... http://www.youtube.com/watch?v=SEouSBMSKP8
Known as Vaikis_
Re: Auto gearbox 3 - 4 - 5 gear lag
Read bout converter lock\unlock, this dip is caused by this function of AT tranny, usually looks like one more small gear has changed. Often see this under part throttle acceleration when rpms r almost still but speed continue rising. 1-2 gears have big torque multiplication and this function ( converter lock ) not working under full throttle to reduce stress on tranny, but i can cofirm that 2nd gear can behave like this under light throttle accel.
This function was implemented to save on losses in converter duruing cruising. I can be wrong but gear ratios r fixed and nothing else on a way from crank to wheels can cause this rpms dip.
This function was implemented to save on losses in converter duruing cruising. I can be wrong but gear ratios r fixed and nothing else on a way from crank to wheels can cause this rpms dip.