Immobilizer disable/enable function problem

FlashPro questions & answers specific to the 2007-2008 US TSX
Post Reply
kitbkk
Posts: 3
Joined: Fri May 14, 2010 8:59 am

Immobilizer disable/enable function problem

Post by kitbkk » Tue Jun 18, 2013 1:09 am

Hi all,
Car is '05 AUDM MT CL9 Euro running JRSC.

I installed the new 07-08 TSX ECU into the car, (we did repin the DLC connector), then we did matched the new ECU to immobilizer, and all that..

The car could start, but running too rich. We had a tuner came and did trim out the fuel a bit for it to be able to drive to the dyno.. Unfortunately he did select "disable immobilizer" accidentally. Now he is trying to enable immobilizer but it seems like it is not sending the command. The car now can start but has the "car key light" showing and shuts down automatically.

Any idea how to solve this problem.

User avatar
Spunkster
Site Admin
Posts: 18012
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: Immobilizer disable/enable function problem

Post by Spunkster » Tue Jun 18, 2013 10:08 am

What is the serial number on the FlashPro?

kitbkk
Posts: 3
Joined: Fri May 14, 2010 8:59 am

Re: Immobilizer disable/enable function problem

Post by kitbkk » Tue Jun 18, 2013 10:05 pm

It's FP-TSX-US-90144
Now we could get the green key icon light to go away but car still does not want to start.

Zoro2006
Posts: 119
Joined: Sun May 02, 2010 3:07 am

Re: Immobilizer disable/enable function problem

Post by Zoro2006 » Wed Jun 19, 2013 6:01 am

kitbkk wrote:It's FP-TSX-US-90144
Now we could get the green key icon light to go away but car still does not want to start.
just try to do "return ECU to stock"
Known as Vaikis_

Post Reply