2006 green connector CAN adapter

FlashPro questions & answers specific to the 2007-2008 US TSX
Post Reply
lonewulfs919
Posts: 8
Joined: Sun Mar 10, 2013 6:04 pm

2006 green connector CAN adapter

Post by lonewulfs919 » Sun Feb 15, 2015 8:59 am

I have an 06 Tsx 6 spd with navi, which I'm not sure if I connected the cables on the green connector right. My green connector looked nothing like the one that was shown on the illustration. There wasn't a brown wire to the far left,instead there was a yellow to the far right. What I did was connect the wires on the top row on the 2nd, and 3rd input. Does that sound correct? I need help ASAP before I take the car to get my ecu programmed. Thanks in advance!

User avatar
Spunkster
Site Admin
Posts: 17943
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: 2006 green connector CAN adapter

Post by Spunkster » Mon Feb 16, 2015 10:35 am

Can you post pictures of exactly what you have connected?

lonewulfs919
Posts: 8
Joined: Sun Mar 10, 2013 6:04 pm

Re: 2006 green connector CAN adapter

Post by lonewulfs919 » Fri Feb 20, 2015 1:46 pm

Can't see it clearly but, on the very top row placed the wires on the 2nd and 3rd position.so it looks something like : top row 1st position blank, 2NDn and 3rd can wiring, 4th position there's a yellow wiring.
Attachments
20150220_153759.jpg
20150220_153759.jpg (1.86 MiB) Viewed 4389 times

User avatar
Spunkster
Site Admin
Posts: 17943
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: 2006 green connector CAN adapter

Post by Spunkster » Fri Feb 20, 2015 2:06 pm

Have you tried connecting the ECU and FlashPro to see if it can see the ECU connected? That will be a really easy way to tell if it is wired correctly.

sky200
Posts: 1
Joined: Fri Jun 12, 2015 2:32 pm

Re: 2006 green connector CAN adapter

Post by sky200 » Fri Jun 12, 2015 2:42 pm

Hi,

I attempted to do this today and I believe I came across the same issue.
I also do not see a single brown wire on the far left, but only a single yellow wire on the far right.
Should I go ahead and proceed with inserting the red and white wire on slot#2 and #3 anyway?

Also any tips on accessing the connector? Space is very limited =(
Thanks for your help.

Image
Image
Image

jayphalla
Posts: 2
Joined: Sat Aug 05, 2017 5:15 pm

Re: 2006 green connector CAN adapter

Post by jayphalla » Sat Aug 05, 2017 5:19 pm

Hey guys,

Hope you guys were able to the issue. Recently purchased flashpro for 04 TSX, and came across the issues of the top slot having a yellow/red wire on the far right. The rest of the slots in that top row are blanks.

How did you guys over come the problem?

Thanks,
Jason

User avatar
Spunkster
Site Admin
Posts: 17943
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: 2006 green connector CAN adapter

Post by Spunkster » Mon Aug 07, 2017 9:26 am

You will have to post a picture showing this.

Post Reply