Page 1 of 1

2006 green connector CAN adapter

Posted: Sun Feb 15, 2015 8:59 am
by lonewulfs919
I have an 06 Tsx 6 spd with navi, which I'm not sure if I connected the cables on the green connector right. My green connector looked nothing like the one that was shown on the illustration. There wasn't a brown wire to the far left,instead there was a yellow to the far right. What I did was connect the wires on the top row on the 2nd, and 3rd input. Does that sound correct? I need help ASAP before I take the car to get my ecu programmed. Thanks in advance!

Re: 2006 green connector CAN adapter

Posted: Mon Feb 16, 2015 10:35 am
by Spunkster
Can you post pictures of exactly what you have connected?

Re: 2006 green connector CAN adapter

Posted: Fri Feb 20, 2015 1:46 pm
by lonewulfs919
Can't see it clearly but, on the very top row placed the wires on the 2nd and 3rd position.so it looks something like : top row 1st position blank, 2NDn and 3rd can wiring, 4th position there's a yellow wiring.

Re: 2006 green connector CAN adapter

Posted: Fri Feb 20, 2015 2:06 pm
by Spunkster
Have you tried connecting the ECU and FlashPro to see if it can see the ECU connected? That will be a really easy way to tell if it is wired correctly.

Re: 2006 green connector CAN adapter

Posted: Fri Jun 12, 2015 2:42 pm
by sky200
Hi,

I attempted to do this today and I believe I came across the same issue.
I also do not see a single brown wire on the far left, but only a single yellow wire on the far right.
Should I go ahead and proceed with inserting the red and white wire on slot#2 and #3 anyway?

Also any tips on accessing the connector? Space is very limited =(
Thanks for your help.

Image
Image
Image

Re: 2006 green connector CAN adapter

Posted: Sat Aug 05, 2017 5:19 pm
by jayphalla
Hey guys,

Hope you guys were able to the issue. Recently purchased flashpro for 04 TSX, and came across the issues of the top slot having a yellow/red wire on the far right. The rest of the slots in that top row are blanks.

How did you guys over come the problem?

Thanks,
Jason

Re: 2006 green connector CAN adapter

Posted: Mon Aug 07, 2017 9:26 am
by Spunkster
You will have to post a picture showing this.

Re: 2006 green connector CAN adapter

Posted: Tue Nov 10, 2020 2:44 pm
by Hondalove42484
Hello, I have a 2006 TSX 6 speed w/navi, and I came into the exact same harness. I believe since the instructions say the top 5 slots all are linked together,and the can hi/lo should be able to plug into the topmost connector since it has just the yellow wire coming out the #4 pin. Seems nobody knows of this, I am going to test the # 2 and 3 pins to confirm, there should be a 2.5 volt difference between them when they are transmitting data. But if anyone knows for sure, please let me know, thank you all

Re: 2006 green connector CAN adapter

Posted: Thu Nov 26, 2020 2:20 pm
by Hondalove42484
I ran into the same issue on my 06 USDM TSX 6spd, and tested the top connector slots 2 and 3, they tested what a CAN high and low should test for voltage, so in the next few days I'll have an answer when I run the jumpers to the DLC.

Re: 2006 green connector CAN adapter

Posted: Wed Jan 06, 2021 12:47 pm
by Hondalove42484
The answer is yes, the middle two pins are CAN HI/LO, for all the people whom have encountered this harness with one yellow wire coming out the top right pin. Sorry for the late response