Page 1 of 1

Flashpro not reading VIN/ECU.

Posted: Sat Nov 05, 2016 2:59 pm
by 2.2Lude
I have a 2006 acura tsx MT. installed the can bus adapter, 2007 acura tsx AT ecu and had it programmed. The ecu starts the car. When I try to lock the flashpro unit to the car it says "VIN not recorded" Under the flashpro tab, all functions are green. The software says ECU not detect or not connected. Flashpro serial number FP-TSX-US-90595, Flashpro manager firmware 2.4.9.0.

Sent flashpro support data a few minutes ago as well.

Re: Flashpro not reading VIN/ECU.

Posted: Sat Nov 05, 2016 4:50 pm
by 2.2Lude
Got it. Seems like the DLC connectors are a bit finicky, when I plugged in the Flashpro to the OBD2 it would push the Red wire back even though it was already "clicked" in place. Not sure what I did to secure it properly but it seems to be working for now.

Re: Flashpro not reading VIN/ECU.

Posted: Mon Nov 07, 2016 10:44 am
by Spunkster
Thanks for the update.