My car is stock and I am looking to eliminate DBW rev hang. Should I use the "stock equivalent" or "base map" tune? What other changes do I have to do to eliminate/reduce rev hang?
Do I uncheck the following:
"1st gear throttle dampening enabled"
"Overrun throttle opening enabled"
Thanks.
2007 TSX DBX rev hang
Re: 2007 TSX DBX rev hang
I am not aware of the TSX having any issues with "rev hang".
Re: 2007 TSX DBX rev hang
In fact, you mentioned some settings on this thread viewtopic.php?f=37&t=19201.
I am trying to figure out what the overrun fuel cut delay should be set for this MY TSX. Thanks.
I am trying to figure out what the overrun fuel cut delay should be set for this MY TSX. Thanks.
Re: 2007 TSX DBX rev hang
Since it is adjustable you can try different settings and see what works best for you.
Re: 2007 TSX DBX rev hang
I tried 110,80,60,60, 40 and the first and second gear still seems a bit jerky. I am planning lower the values a bit. 3-6 gear feels great.
Re: 2007 TSX DBX rev hang
Anyone who has been able to reduce "rev hang", please post the settings used. Thanks.
Re: 2007 TSX DBX rev hang
I'm interested in this too, I'll search around on tsxclub.com and see if anyone has a solution.