Page 1 of 1
2007 TSX DBX rev hang
Posted: Tue Apr 17, 2018 1:59 pm
by 9000revs
My car is stock and I am looking to eliminate DBW rev hang. Should I use the "stock equivalent" or "base map" tune? What other changes do I have to do to eliminate/reduce rev hang?
Do I uncheck the following:
"1st gear throttle dampening enabled"
"Overrun throttle opening enabled"
Thanks.
Re: 2007 TSX DBX rev hang
Posted: Tue Apr 17, 2018 2:05 pm
by Spunkster
I am not aware of the TSX having any issues with "rev hang".
Re: 2007 TSX DBX rev hang
Posted: Tue Apr 17, 2018 2:52 pm
by 9000revs
Yes they do.
Re: 2007 TSX DBX rev hang
Posted: Wed Apr 18, 2018 6:56 am
by 9000revs
In fact, you mentioned some settings on this thread
viewtopic.php?f=37&t=19201.
I am trying to figure out what the overrun fuel cut delay should be set for this MY TSX. Thanks.
Re: 2007 TSX DBX rev hang
Posted: Wed Apr 18, 2018 9:49 am
by Spunkster
Since it is adjustable you can try different settings and see what works best for you.
Re: 2007 TSX DBX rev hang
Posted: Wed Apr 18, 2018 5:11 pm
by 9000revs
I tried 110,80,60,60, 40 and the first and second gear still seems a bit jerky. I am planning lower the values a bit. 3-6 gear feels great.
Re: 2007 TSX DBX rev hang
Posted: Thu Apr 19, 2018 6:53 am
by 9000revs
Anyone who has been able to reduce "rev hang", please post the settings used. Thanks.
Re: 2007 TSX DBX rev hang
Posted: Wed Jun 06, 2018 3:57 am
by coventsm
I'm interested in this too, I'll search around on tsxclub.com and see if anyone has a solution.
Re: 2007 TSX DBX rev hang
Posted: Wed Jun 06, 2018 5:46 am
by coventsm