Traction control - retrofitting abs sensors

Lyle_57IAL
Posts: 131
Joined: Wed Jul 25, 2012 5:42 pm

Re: Traction control - retrofitting abs sensors

Post by Lyle_57IAL » Sun May 01, 2016 6:06 am

hey hondata !

i am currently in the process of installing my Traction control system. I have basically had to retrofit the rear ABS sensors to my oem arms. As there is a little play with the clearances between the pickup sensor and the Tooth ring - what is a good guide distance / clearance to have between these?

Cheers

User avatar
Hondata
Site Admin
Posts: 8546
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: Traction control - retrofitting abs sensors

Post by Hondata » Sun May 01, 2016 7:53 am

It depends on the sensor type - inductive or hall effect. Generally around 1 mm of clearance is required.
Hondata

Lyle_57IAL
Posts: 131
Joined: Wed Jul 25, 2012 5:42 pm

Re: Traction control - retrofitting abs sensors

Post by Lyle_57IAL » Sun May 01, 2016 11:13 pm

I'm just using some oem sensors off a dc2 go around 0.8mm clearance

Lyle_57IAL
Posts: 131
Joined: Wed Jul 25, 2012 5:42 pm

Re: Traction control - retrofitting abs sensors

Post by Lyle_57IAL » Fri May 06, 2016 1:46 am

Hey guys. Does anyone have the traction control module wire colour codeing for the 4 wheel sensors ?

Cheers :)

User avatar
Spunkster
Site Admin
Posts: 17462
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: Traction control - retrofitting abs sensors

Post by Spunkster » Fri May 06, 2016 9:32 am

All we have is listed in the help file: http://www.hondata.com/help/tractioncon ... wiring.htm

Lyle_57IAL
Posts: 131
Joined: Wed Jul 25, 2012 5:42 pm

Re: Traction control - retrofitting abs sensors

Post by Lyle_57IAL » Fri May 06, 2016 6:43 pm

not i mean the wiring colour code of the model pig tail itself? what is fr,fl,rr,rl etc

User avatar
Hondata
Site Admin
Posts: 8546
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: Traction control - retrofitting abs sensors

Post by Hondata » Sat May 07, 2016 7:18 pm

What exactly do you mean? The wire colors for what?
Hondata

Lyle_57IAL
Posts: 131
Joined: Wed Jul 25, 2012 5:42 pm

Re: Traction control - retrofitting abs sensors

Post by Lyle_57IAL » Sun May 08, 2016 3:06 am

the wire colour code on the actual hondata traction control unit itself

User avatar
Hondata
Site Admin
Posts: 8546
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: Traction control - retrofitting abs sensors

Post by Hondata » Sun May 08, 2016 10:18 am

It that not listed here right at the top?
http://www.hondata.com/help/tractioncon ... wiring.htm
Hondata

Lyle_57IAL
Posts: 131
Joined: Wed Jul 25, 2012 5:42 pm

Re: Traction control - retrofitting abs sensors

Post by Lyle_57IAL » Mon May 16, 2016 1:28 am

Hi Hondata,
Is there any advantage/disadvantage in doubling up or running individually the front and / or rear sensors?

User avatar
Hondata
Site Admin
Posts: 8546
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: Traction control - retrofitting abs sensors

Post by Hondata » Mon May 16, 2016 8:01 am

For the front you really need two sensors as the drivetrain and tires will alternately 'wind up' on each side, so a single sensor does not represent the actual wheel speed.
For the rear a single sensor will work ok for a drag car, but for anything else you need two to cope with cornering.
Hondata

Post Reply