Max Slip target
Posted: Tue Nov 20, 2018 6:11 pm
Hi,
I'm looking to install TCS on my rally civic. After reading the manuals I've found the slope output is 0.1v/%slip. Given the max input is 4.3 volts to ELD, this means approximately a maximum slip target of ~40%. This could be potentially lower after accounting for the voltage offset. Can anyone confirm this is the maximum amount?
Would it be possible in the future to be able to change the slope in S300 and TCS module? For the wide variety of conditions I would need up to 80 pct slip in mud/snow/ice. Base gravel would be in the 20 to 40 pct range.
Thanks
I'm looking to install TCS on my rally civic. After reading the manuals I've found the slope output is 0.1v/%slip. Given the max input is 4.3 volts to ELD, this means approximately a maximum slip target of ~40%. This could be potentially lower after accounting for the voltage offset. Can anyone confirm this is the maximum amount?
Would it be possible in the future to be able to change the slope in S300 and TCS module? For the wide variety of conditions I would need up to 80 pct slip in mud/snow/ice. Base gravel would be in the 20 to 40 pct range.
Thanks