civic si 2006 problem

Post Reply
ep3K24lol
Posts: 3
Joined: Thu Jul 05, 2012 2:10 pm

civic si 2006 problem

Post by ep3K24lol »

hello i got a civic si 2006 fg2 it doesnt came with the sensor so i install the sensors from a civic si 2008, everything works ok, i wire the traction control to EGRL pin, no errors nothing, but the flash pro shows -9% traction control over slip (from ecu) and it doesnt command when the car is sliping.

these are the datalogs.
Attachments
lastdata.fpdl
(86.34 KiB) Downloaded 487 times
213last.fpcal
(18.83 KiB) Downloaded 515 times
User avatar
Hondata
Site Admin
Posts: 10434
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: civic si 2006 problem

Post by Hondata »

What sensor was your vehicle missing? All 2003+ Hondas had ABS.

From the datalog the wheel speed sensors are (mostly) working and the slip calculation looks correct. However the ELD voltage is not doing anything.

So:
- check you FlashProManager version
- find and fix the problem where the RF speed sensor is getting spikes in speed
- check you have the TC set up and wired for active speed sensors
- use the TC test output to check the wiring to the ECU EGRL input
Hondata
Post Reply