Nothing showing on calibrations or table windows.

2012+ US/Canadian Civic Si / 2013+ ILX
Post Reply
schoeung
Posts: 4
Joined: Tue Apr 29, 2014 6:38 pm

Nothing showing on calibrations or table windows.

Post by schoeung » Tue Apr 29, 2014 6:47 pm

I just got flashpro for my 2012 civic si, Did the hondata stock reflash not "stock equivalent". After i uploaded my log, nothing shows on the calibration or table window. I just wanted to check out the fuel parameters and 2d/3d graph. Im running the flashpro v1.8 software on my laptop for windows 7. Hondata, can you please chime in as to why i can't see anything on those two windows? everything seems very limited as i can only see information on the display, graph and sensors window.

thanks.

pepperdanky
Posts: 81
Joined: Mon Oct 14, 2013 6:14 am

Re: Nothing showing on calibrations or table windows.

Post by pepperdanky » Wed Apr 30, 2014 5:04 am

You have to open both the calibration file and datalog file.

schoeung
Posts: 4
Joined: Tue Apr 29, 2014 6:38 pm

Re: Nothing showing on calibrations or table windows.

Post by schoeung » Wed Apr 30, 2014 6:07 pm

thanks

Post Reply