Knock table problem

2012+ US/Canadian Civic Si / 2013+ ILX
Post Reply
iketh
Posts: 44
Joined: Sat Apr 12, 2014 7:55 pm

Knock table problem

Post by iketh » Sat May 03, 2014 10:34 am

I can't lower timing at 5500 rpm at 30-40 degrees with the knock tables. I've gone all the way down to -16 at 5500rpm 40 degrees and timing remains 25 degrees when the table is set at 26. Example is 2:37.7 of the attached log.

Also, can we get the knock tables to automatically change from low to high when viewing logs?
Attachments
v3.95 1.fpdl
(3.52 MiB) Downloaded 106 times
v3.95 MAF.fpcal
(21.93 KiB) Downloaded 98 times

iketh
Posts: 44
Joined: Sat Apr 12, 2014 7:55 pm

Re: Knock table problem

Post by iketh » Sat May 03, 2014 9:23 pm

never mind I figured it out :)

Post Reply