Page 1 of 1

Knock table problem

Posted: Sat May 03, 2014 10:34 am
by iketh
I can't lower timing at 5500 rpm at 30-40 degrees with the knock tables. I've gone all the way down to -16 at 5500rpm 40 degrees and timing remains 25 degrees when the table is set at 26. Example is 2:37.7 of the attached log.

Also, can we get the knock tables to automatically change from low to high when viewing logs?

Re: Knock table problem

Posted: Sat May 03, 2014 9:23 pm
by iketh
never mind I figured it out :)