Page 1 of 1
Is flashpro available for my civic si-not american
Posted: Tue Jul 05, 2016 3:23 am
by bian.yy
ECU No. 37820-RX8-H11.
Please check , if no, when can it be available?
BTW, I bought a US version 37820-RX0-A03, but this can't be paired with my IMMO, after analysis I think the reason is:
US 2012 si got key start, my 2014 China SI got ONE PUSH START, I don't think they can be paired, am I right?
Cheers!
Re: China version civic si available of flashpro?
Posted: Tue Jul 05, 2016 9:40 am
by Hondata
No, the A03 US ECU is not push to start. The 2014-2015 ECU is push to start, and may work.
Re: China version civic si available of flashpro?
Posted: Fri Jul 08, 2016 4:01 am
by bian.yy
Hondata wrote:No, the A03 US ECU is not push to start. The 2014-2015 ECU is push to start, and may work.
Can I flash my usdm civic si 2012 ecu to 2014 push start firmware via flashpro?
Re: China version civic si available of flashpro?
Posted: Fri Jul 08, 2016 7:39 am
by Hondata
No, there are hardware differences in the ECUs.
Re: China version civic si available of flashpro?
Posted: Mon Sep 26, 2016 7:17 pm
by bian.yy
Can you make a parameter for disable dtc 2647 as I dont have this hardware on my car?
Re: China version civic si available of flashpro?
Posted: Tue Sep 27, 2016 8:42 am
by Hondata
For what calibration?
Re: China version civic si available of flashpro?
Posted: Tue Sep 27, 2016 7:57 pm
by bian.yy
Hondata wrote:For what calibration?
I am using "US Civic Si 2012-2014,Hondata reflash" on my 2014 si.
Re: Is flashpro available for my civic si-not american
Posted: Thu Sep 29, 2016 3:40 pm
by bian.yy
Hondata member,Can you disable 2647 for my car? As I dont have the hardware of this car in my country.
Re: China version civic si available of flashpro?
Posted: Wed Oct 05, 2016 4:48 pm
by bian.yy
Hondata wrote:For what calibration?
Can you add a checkbox to OBDII TESTS section to let me disable p2647 as my car dosenot have vtec feedback hardware.
I am using 2014 civic si ecu of US.
I am using calibration "US Civic Si 2012-2014,Hondata reflash".
Thanks.
Re: Is flashpro available for my civic si-not american
Posted: Mon May 29, 2017 4:20 am
by georgekwan2005
Disable the VTEC oil pressure switch in Calibration-VTEC
I'm also using the US ECU for China Si