iOS Applications

Post Reply
User avatar
Hondata
Site Admin
Posts: 10434
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

iOS Applications

Post by Hondata »

With iOS devices you can either use the Hondata Mobile app, or use any app which uses the elm327 protocol.

To run the Hondata Mobile app you need the iPhone 4S and later, iPod touch 3rd generation and later, iPad 3rd generation and later. iOS 6 or later must be used. Many apps uses the elm327 protocol. The apps which we have tested are:
Hondata
Gernby
Posts: 307
Joined: Thu Oct 29, 2009 2:53 pm

Re: iOS Applications

Post by Gernby »

I was able to connect to my FlashPro from the Hondata Mobile app without any issues at all with my iPhone 5S, but could not figure out how to connect with DashCommand. Could you provide some tips?
'06 NFR S2000
User avatar
Hondata
Site Admin
Posts: 10434
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: iOS Applications

Post by Hondata »

DashCommand only works via WiFi. Your phone needs to be jailbroken and a BT to WiFi bridge installed. I used roqyBT4 & roqyBT7. The passcode also needs to be 1234
Hondata
antkouv
Posts: 52
Joined: Fri Apr 26, 2013 10:58 am

Re: iOS Applications

Post by antkouv »

Is there an update on this? Can we connect an iphone to the Flashpro using Dash command?
antkouv
Posts: 52
Joined: Fri Apr 26, 2013 10:58 am

Re: iOS Applications

Post by antkouv »

Hello. Do you know if we can connect the flashpro to the Racechrono app?
vladvitt
Posts: 2
Joined: Mon Feb 15, 2021 5:18 am

Re: iOS Applications

Post by vladvitt »

antkouv wrote: Fri Jan 22, 2021 12:38 pm Hello. Do you know if we can connect the flashpro to the Racechrono app?
Hello, yes flashpro is able to connect and working with Racechrono.
I did it in in order to get logs from engimne ECU during track sesion.

There is onboard usinng flashpro + hondata https://youtu.be/TslQ3_2KK3M

Is only one thing have been occured, after some racechrono update the throttle opening maximium shows 76% only
Post Reply