With iOS devices you can either use the Hondata Mobile app, or use any app which uses the elm327 protocol.
To run the Hondata Mobile app you need the iPhone 4S and later, iPod touch 3rd generation and later, iPad 3rd generation and later. iOS 6 or later must be used.
Many apps uses the elm327 protocol. The apps which we have tested are:
iOS Applications
iOS Applications
Hondata
Re: iOS Applications
I was able to connect to my FlashPro from the Hondata Mobile app without any issues at all with my iPhone 5S, but could not figure out how to connect with DashCommand. Could you provide some tips?
'06 NFR S2000
Re: iOS Applications
DashCommand only works via WiFi. Your phone needs to be jailbroken and a BT to WiFi bridge installed. I used roqyBT4 & roqyBT7. The passcode also needs to be 1234
Hondata
Re: iOS Applications
Is there an update on this? Can we connect an iphone to the Flashpro using Dash command?
Re: iOS Applications
Hello. Do you know if we can connect the flashpro to the Racechrono app?
Re: iOS Applications
Hello, yes flashpro is able to connect and working with Racechrono.
I did it in in order to get logs from engimne ECU during track sesion.
There is onboard usinng flashpro + hondata https://youtu.be/TslQ3_2KK3M
Is only one thing have been occured, after some racechrono update the throttle opening maximium shows 76% only