DTC P0034 disable option
DTC P0034 disable option
I was wondering if it were possible to disable this DTC for those of use running aftermarket turbos?
Re: DTC P0034 disable option
I currently do not have the valve / actuator. The sensor is still plug in; however, the valve/actuator is not connected. Do you think having a valve / actuator connected will help?
Re: DTC P0034 disable option
Yes. The error is low or high voltage, and with something plugged in it might go away.
Hondata
Re: DTC P0034 disable option
Where would you recommend I run the hose's. The actuator sensor is plugged in, but there are no hose's running off of it. I think it is looking for boost or some kind of flow. The turbo boost sensor is fine, it is plugged into the BorgWarner.
- Attachments
-
- IMAG2552.jpg (2.61 MiB) Viewed 10732 times
-
- Screen shot 2015-10-02 at 4.34.57 PM.png (77.65 KiB) Viewed 10732 times