what is needed for logging

HondaLogger datalogging software questions and answers.
Post Reply
sdenoo
Posts: 1
Joined: Wed May 19, 2021 12:58 pm

what is needed for logging

Post by sdenoo »

I want to read my ecu, but its a bit of a hybrid A b16 obd1 ecu chipped with cn2 port and a sticker saying data logging . I check the ecu for codes and get 11 or 2 depending on the definition of long and short pulse. The ecu came from superfastminis.com and their info/knowledge seems pretty slim

So I made a cn2 to usb cable, downloaded HondaLogger 3.6.4.0, but I'm missing a translation box or something . This product is discontinued, so what replaced it? I need something to read data, and I'm not ready to change the ecu maps.

The ECU is labled 250-008 with permanent marker. The wiring harness has been modified/cut to work in a classic mini with a nice VTEC, and I'm worried that something important is missing. Car starts and runs fine at the moment
User avatar
Spunkster
Site Admin
Posts: 22737
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: what is needed for logging

Post by Spunkster »

The s300 replaces the s200. The ECU would have to be socketed for use with the s300.

https://www.hondata.com/products/obdi/s300
Post Reply