Cams and Hondata System, What to use?

HondaLogger datalogging software questions and answers.
Locked
Brad
Posts: 1
Joined: Wed Mar 21, 2007 3:08 pm
Location: Ft. Myers, Fl.

Cams and Hondata System, What to use?

Post by Brad » Wed Mar 21, 2007 3:27 pm

I am building a full tube chassis 3/4 scale road race car. It used to run a ZX-12 motorcycle engine in it. I am putting a 2003 S-2000 motor and transmission in it. I do not know anything about the "V-Tec" I have been told from one guy that the v-tec cams are not what I want for my application since they come on in the middle of a turn. What help can you give me on this. Cams, and Engine management for this car. It will weight about 1500 lbs when complete and I will run SCCA and PBOC Road races. Thanks, Brad

User avatar
Hondata
Site Admin
Posts: 8546
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Post by Hondata » Thu Mar 22, 2007 11:12 am

VTEC is fine for road racing - the cams switch where the torque curves of the low speed and high speed cams overlap, so the transition is seamless. In any case it is fairly easy to keep the engine in the high cam the whole time.

For engine management, see http://www.hondata.com/s2000kpro.html
Hondata

Locked