Compatibility for 17 CIVIC 1.5T MT

Civic 2016+ 1.5 Turbo
Post Reply
JDMEP3TYPER
Posts: 5
Joined: Sat Apr 15, 2017 11:38 pm

Compatibility for 17 CIVIC 1.5T MT

Post by JDMEP3TYPER » Wed Apr 19, 2017 8:40 pm

We are a HONDA tuning shop in China, and we are joining some racing events with the 2017 1.5T MT CIVIC recently,
the new civic handles and drives so well, and we decided to start a new project and tune this civic to a track only race car.

Since we knew you guys are HONDA ECU PROS and done great jobs at ECU tuning, we decided to use the FlashPro on our new project car. Then I asked my friend in US for helping, and bought the FlashPro for 2016-2017 US turbo civic, The Serial No. FP-16CIVIC-L15T-200152. After we received the FlashPro and we found that the FlashPro can not be locked to the vehicle, the error said This FlashPro can only be used with CIVIC 2016+ 1.5T Americas vehicles. The current vehicle is a unknown. I think the reason is the ECU number don’t match. My ECU number is 37820-5AF-H13.

What should I do? May I have some advices or help?

User avatar
Spunkster
Site Admin
Posts: 16691
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: Compatibility for 17 CIVIC 1.5T MT

Post by Spunkster » Thu Apr 20, 2017 9:41 am

The FlashPro you have will not be able to be used on that vehicle. You will need to get the international version. Once you have that you can send support information and then we can give you further instructions to help us be able to support that ECU.

JDMEP3TYPER
Posts: 5
Joined: Sat Apr 15, 2017 11:38 pm

Re: Compatibility for 17 CIVIC 1.5T MT

Post by JDMEP3TYPER » Thu Apr 20, 2017 6:01 pm

Thank you for your kind reply. I'm new to the Flashpro, and purchased US version by mistake,
cause the Flashpro I have is brand new only the package was opened, may I exchange it to a international version?

User avatar
Hondata
Site Admin
Posts: 8282
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: Compatibility for 17 CIVIC 1.5T MT

Post by Hondata » Fri Apr 21, 2017 9:05 am

Email support@hondata.com with the serial number and where you purchased it from.
Hondata

JDMEP3TYPER
Posts: 5
Joined: Sat Apr 15, 2017 11:38 pm

Re: Compatibility for 17 CIVIC 1.5T MT

Post by JDMEP3TYPER » Fri Apr 21, 2017 9:48 am

Thank you for your support.
I sent the serial number by email.

JDMEP3TYPER
Posts: 5
Joined: Sat Apr 15, 2017 11:38 pm

Re: Compatibility for 17 CIVIC 1.5T MT

Post by JDMEP3TYPER » Tue May 09, 2017 7:48 am

Hondata wrote:
Fri Apr 21, 2017 9:05 am
Email support@hondata.com with the serial number and where you purchased it from.
Thank you very much for exchanging my Flashpro to a international version.
The new one should arrive tomorrow, hope it works properly.
Thank you for your support.

JDMEP3TYPER
Posts: 5
Joined: Sat Apr 15, 2017 11:38 pm

Re: Compatibility for 17 CIVIC 1.5T MT

Post by JDMEP3TYPER » Tue May 09, 2017 7:34 pm

Spunkster wrote:
Thu Apr 20, 2017 9:41 am
The FlashPro you have will not be able to be used on that vehicle. You will need to get the international version. Once you have that you can send support information and then we can give you further instructions to help us be able to support that ECU.
The international version arrived today, and still it can't lock to the vehicle,
My ECU number is 37820-5AF-H13, vehicle is 2017 Civic sedan 1.5T MT in China.
Please support my ECU, Please. Please. Please...

linzilich
Posts: 2
Joined: Tue Oct 17, 2017 6:42 am

Re: Compatibility for 17 CIVIC 1.5T MT

Post by linzilich » Tue Oct 17, 2017 9:25 am

你好楼主!我是厦门的,今天刚入手的Hondata,拆开一开全是英文完全没有方向,我是十代思域手动1.5T豪华版的 !不知道能否教教小弟 ,感激不尽 !我微信:linzilich

Post Reply