Page 1 of 1

TPedal maximum 96%

Posted: Tue Sep 10, 2019 7:09 pm
by turboroe
Hi mates, I just started with flashpro (Brazil 1.5 touring version) and I am wondering if TPedal never rising above 96% when flooring is normal.
TPlate goes 101% and I get almost 21PSI boost, and the power is definetely there...

tpedal.JPG (128.43 KiB) Viewed 905 times

Re: TPedal maximum 96%

Posted: Wed Sep 11, 2019 7:21 am
by Hondata
If the throttle plate is opening fully, then it does not matter.

Re: TPedal maximum 96%

Posted: Thu Sep 19, 2019 8:50 am
by Emount91
my t.pedal only makes it to 96% as well, but t.plate opens 100-101%. so it's as throttled as it can be at 96%.

Re: TPedal maximum 96%

Posted: Thu Sep 19, 2019 11:56 am
by Emount91
Here's a datalog that shows t.pedal is at 96% while t.plate is at 101%. Seems normal.
(47.75 KiB) Downloaded 34 times
Hondata, anyway to change the throttle pedal to plate ratio? "improve throttle response" seems too sensitive, while having this mod disabled seems to make the pedal too fluffy. would love an in-between setting or a way to create a custom one.

I think this was doable on the older gens?