Page 1 of 2

FK8 Error uploading

Posted: Wed Sep 19, 2018 10:52 am
by L_S_i
Hi, a customer brought me a car and a flashpro where the bosch ecu is jailbroken already. While uploading a calibration I got the following code and now I cant even return the ecu to stock. It happens in both upload and return to stock.

"Failure information: Code 0x4 Step 16 Address 0x340000
Explanation: The ECU stopped responding while reflashing. Check OBDII connector pins."

The flash pro was successfully locked to the ecu/car. Software is up to date and Flashpro updated its firmware when ignition was turned on for the first time.

Thanks

Re: FK8 Error uploading

Posted: Wed Sep 19, 2018 10:57 am
by Jun43
did you try uploading the calibration with just the dongle itself and not connected to the laptop

just a temp solution to get it running maybe

Re: FK8 Error uploading

Posted: Wed Sep 19, 2018 11:05 am
by Spunkster
What is the FlashPro serial number?

What is the ECU serial number? (should start with 95BFA)

From Help, About, what is the version of software you are using?

Re: FK8 Error uploading

Posted: Wed Sep 19, 2018 11:56 am
by L_S_i
Hi,

software is 3.1.5.0

Flashpro serial is FP-CTR-FK8-INT-370061

Ecu is 95BFE030032988

Re: FK8 Error uploading

Posted: Wed Sep 19, 2018 12:55 pm
by Spunkster
Who did the Jailbreak on this ECU?

Re: FK8 Error uploading

Posted: Wed Sep 19, 2018 12:57 pm
by L_S_i
A chiptuning company did. With magpro hardware/software. Do you think the jailbreak wasn't properly done and could cause this issue? But wouldn't flashpro software detect that the ecu is locked and prevent the upload?

Re: FK8 Error uploading

Posted: Wed Sep 19, 2018 12:58 pm
by Spunkster
With everything plugged in and the ignition on, go to the Help menu and click on send information to Hondata support. include the serial number on the FlashPro and a description of the problem.

Re: FK8 Error uploading

Posted: Thu Sep 20, 2018 5:01 am
by L_S_i
Sent a couple hours ago. Thanks

Re: FK8 Error uploading

Posted: Thu Sep 20, 2018 9:57 am
by Hondata
It is because it is a E03 ECU but has a G03 calibration in it. We will send instructions via email.

Re: FK8 Error uploading

Posted: Thu Sep 20, 2018 12:00 pm
by L_S_i
Hondata wrote: Thu Sep 20, 2018 9:57 am It is because it is a E03 ECU but has a G03 calibration in it. We will send instructions via email.
Thank you for the reply. Havent got the email yet. Please let me know when its sent. Thanks again.

Re: FK8 Error uploading

Posted: Mon Sep 24, 2018 1:42 pm
by L_S_i
Hi guys. Havent got the email yet and the customer needs his car back. Its pending waiting on that email . Thanks.

Re: FK8 Error uploading

Posted: Mon Sep 24, 2018 2:56 pm
by Spunkster
We have emailed you, but your ECU has not been properly jailbroken and will have to be corrected by whoever did the jailbreak on it.

Re: FK8 Error uploading

Posted: Mon Sep 24, 2018 3:22 pm
by L_S_i
Havent got it. Can you please send it to raceandmap@gmail.com . Thanks

Re: FK8 Error uploading

Posted: Tue Sep 25, 2018 12:44 pm
by L_S_i
Sorry to persistent guys but I havent recieved the email. Can you please make sure its sent to raceandmap@gmail. Thanks.

Re: FK8 Error uploading

Posted: Fri Sep 28, 2018 2:00 pm
by Spunkster
your ECU has not been properly jailbroken and will have to be corrected by whoever did the jailbreak on it

Don't worry about the email, it is telling you what I have just said.