FK8 Error uploading
FK8 Error uploading
Hi, a customer brought me a car and a flashpro where the bosch ecu is jailbroken already. While uploading a calibration I got the following code and now I cant even return the ecu to stock. It happens in both upload and return to stock.
"Failure information: Code 0x4 Step 16 Address 0x340000
Explanation: The ECU stopped responding while reflashing. Check OBDII connector pins."
The flash pro was successfully locked to the ecu/car. Software is up to date and Flashpro updated its firmware when ignition was turned on for the first time.
Thanks
"Failure information: Code 0x4 Step 16 Address 0x340000
Explanation: The ECU stopped responding while reflashing. Check OBDII connector pins."
The flash pro was successfully locked to the ecu/car. Software is up to date and Flashpro updated its firmware when ignition was turned on for the first time.
Thanks
Re: FK8 Error uploading
did you try uploading the calibration with just the dongle itself and not connected to the laptop
just a temp solution to get it running maybe
just a temp solution to get it running maybe
Re: FK8 Error uploading
What is the FlashPro serial number?
What is the ECU serial number? (should start with 95BFA)
From Help, About, what is the version of software you are using?
What is the ECU serial number? (should start with 95BFA)
From Help, About, what is the version of software you are using?
Re: FK8 Error uploading
Hi,
software is 3.1.5.0
Flashpro serial is FP-CTR-FK8-INT-370061
Ecu is 95BFE030032988
software is 3.1.5.0
Flashpro serial is FP-CTR-FK8-INT-370061
Ecu is 95BFE030032988
Re: FK8 Error uploading
Who did the Jailbreak on this ECU?
Re: FK8 Error uploading
A chiptuning company did. With magpro hardware/software. Do you think the jailbreak wasn't properly done and could cause this issue? But wouldn't flashpro software detect that the ecu is locked and prevent the upload?
Last edited by L_S_i on Wed Sep 19, 2018 12:58 pm, edited 1 time in total.
Re: FK8 Error uploading
With everything plugged in and the ignition on, go to the Help menu and click on send information to Hondata support. include the serial number on the FlashPro and a description of the problem.
Re: FK8 Error uploading
Sent a couple hours ago. Thanks
Re: FK8 Error uploading
It is because it is a E03 ECU but has a G03 calibration in it. We will send instructions via email.
Hondata
Re: FK8 Error uploading
Hi guys. Havent got the email yet and the customer needs his car back. Its pending waiting on that email . Thanks.
Re: FK8 Error uploading
We have emailed you, but your ECU has not been properly jailbroken and will have to be corrected by whoever did the jailbreak on it.
Re: FK8 Error uploading
Havent got it. Can you please send it to raceandmap@gmail.com . Thanks
Re: FK8 Error uploading
Sorry to persistent guys but I havent recieved the email. Can you please make sure its sent to raceandmap@gmail. Thanks.
Re: FK8 Error uploading
your ECU has not been properly jailbroken and will have to be corrected by whoever did the jailbreak on it
Don't worry about the email, it is telling you what I have just said.
Don't worry about the email, it is telling you what I have just said.