dyno
dyno
i have a question is there a way to prevent codes from coming on when on the dyno i heard there is a maintenance mode that the car can be put in when i got my car dyno all vsa light came on and i just want to make sure its not holding the power back
Re: dyno
See https://www.hondata.com/help/flashpro/fk2_fk2_notes.htm
On the FK8 in R mode you can hold the VSA button for 10 seconds to disable the VSA completely, which will prevent errors. It should work for the FK2. Otherwise you have to do the pedal dance as outlined above.
On the FK8 in R mode you can hold the VSA button for 10 seconds to disable the VSA completely, which will prevent errors. It should work for the FK2. Otherwise you have to do the pedal dance as outlined above.
Hondata
Re: dyno
When I turn VSA in R mode, will be able to do a run in comfort mode without errors? I want to compare power levels in all modes.Hondata wrote: ↑Wed Jan 02, 2019 11:19 am See https://www.hondata.com/help/flashpro/fk2_fk2_notes.htm
On the FK8 in R mode you can hold the VSA button for 10 seconds to disable the VSA completely, which will prevent errors. It should work for the FK2. Otherwise you have to do the pedal dance as outlined above.
Re: dyno
Are you following the instructions at: https://www.hondata.com/help/flashpro/fk2_fk2_notes.htm