Injector Size downgrade: 550cc to 410cc

Hondata model coverage & ECU application questions.
Post Reply
ecronic
Posts: 20
Joined: Tue Jun 14, 2011 2:37 pm

Injector Size downgrade: 550cc to 410cc

Post by ecronic » Thu Nov 01, 2018 8:03 am

Hi All

I've recently purchased grams 550cc injectors. I wanted to know if I can set flashpro to utilise only 410cc instead of 550cc.
Thanks & Regards
------------------------------
Ecronic

User avatar
Spunkster
Site Admin
Posts: 17744
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: Injector Size downgrade: 550cc to 410cc

Post by Spunkster » Thu Nov 01, 2018 9:19 am

Yes you can change the injector size to whatever you are using.

ecronic
Posts: 20
Joined: Tue Jun 14, 2011 2:37 pm

Re: Injector Size downgrade: 550cc to 410cc

Post by ecronic » Thu Nov 01, 2018 11:55 am

Spunkster wrote:
Thu Nov 01, 2018 9:19 am
Yes you can change the injector size to whatever you are using.
Thank you for your reply.

What I meant was, using 550cc but would like to setup in Flashpro as 410cc. Is that possible? If so, what parameters should I be changing to achieve this?
Thanks & Regards
------------------------------
Ecronic

User avatar
Spunkster
Site Admin
Posts: 17744
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: Injector Size downgrade: 550cc to 410cc

Post by Spunkster » Thu Nov 01, 2018 12:19 pm

You need to put in the correct size of the injector you are using. You must also enter the correct dead times for the injectors you are using.

ecronic
Posts: 20
Joined: Tue Jun 14, 2011 2:37 pm

Re: Injector Size downgrade: 550cc to 410cc

Post by ecronic » Thu Nov 01, 2018 8:12 pm

Spunkster wrote:
Thu Nov 01, 2018 12:19 pm
You need to put in the correct size of the injector you are using. You must also enter the correct dead times for the injectors you are using.
Understood! Thanks again!
Thanks & Regards
------------------------------
Ecronic

Post Reply