2012 Civic Si - MAFTuned vs Stock Reflash - VTEC Map

Calibrations for FlashPro Manager - Use all calibrations at your own risk (dyno tuning recommended)

Post Reply
sergcool
Posts: 1
Joined: Sat Nov 10, 2018 12:34 am

2012 Civic Si - MAFTuned vs Stock Reflash - VTEC Map

Post by sergcool » Sat Nov 10, 2018 12:47 am

Hey guys, I recently got hondata and I loaded the Stock Reflash on my 2012 civic si.
I would like to know the difference between MAFTuned vs the Stock Reflash Tune.
I did notice on the under the vtec window on Stock Reflash Tune : RPM Window set to 5000 , but the MAP(bar) set to 4.311
But on the MAFTuned and on the stock equivalent tune the Map(bar) is ~.800

MAFTune from FlashPro
Image

StockReflash from FlashPro
Image

Is it supposed to be 4.311?
I just downloaded it from the calibrations.

User avatar
Spunkster
Site Admin
Posts: 17672
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: 2012 Civic Si - MAFTuned vs Stock Reflash - VTEC Map

Post by Spunkster » Mon Nov 12, 2018 10:54 am

In stock from that table is pretty much disabled and VTEC is set to 5000 with no window. There is no problem with the calibrations built into the software.

Post Reply