Hondata S300 v3 flashing red light
Hondata S300 v3 flashing red light
My Hondata has the green light on the top right corner but when I plug it into my computer d2 starts flashing red rapidly.. is it supposed to be like that? It uploads calibration no problem and my car turns on but the data logging doesn’t work and it’s not reading in real time. What’s my issue?
Re: Hondata S300 v3 flashing red light
From Help, About, what is the version of software you are using? What are you clicking to begin datalogging? Is J12 cut?
Re: Hondata S300 v3 flashing red light
Version software: 2.6.7.0
To start data logging I just hit the yellow lightning bolt but it doesn’t work... j12 is removed
To start data logging I just hit the yellow lightning bolt but it doesn’t work... j12 is removed
Re: Hondata S300 v3 flashing red light
What is the serial number that is on the s300 board inside the ECU?
Has it ever worked? Who did the ECU socketing?
Has it ever worked? Who did the ECU socketing?
Re: Hondata S300 v3 flashing red light
45505 is the serial number
It uploads the calibration on to the ECUs and car turns on with no problem but when I plug it in to my computer i get a red flashing light from d2 and doesn’t let me view anything in real time.
It uploads the calibration on to the ECUs and car turns on with no problem but when I plug it in to my computer i get a red flashing light from d2 and doesn’t let me view anything in real time.
Re: Hondata S300 v3 flashing red light
Do you have on-board datalogging turned on in the calibration?
Re: Hondata S300 v3 flashing red light
At first it wasn’t but then I turned it on and it’s still not doing anything.
Re: Hondata S300 v3 flashing red light
Make sure it is turned off then upload your calibration.
Re: Hondata S300 v3 flashing red light
Ok I’ll try that