Flashpro LED Display

FlashPro Manager software
Post Reply
DL1000Doug
Posts: 3
Joined: Fri Mar 02, 2018 11:22 pm

Flashpro LED Display

Post by DL1000Doug » Sat Mar 30, 2019 6:28 pm

Is there a complete list of what the Flashpro LED flash signals mean? I have a 2009 TSX. I get various flashed codes when I hook up the Flashpro, sometimes a rapid green, sometimes with datalog flashes. If it is anything other than a steady green, I usually have to turn off the car, disconnect the Flashpro and reconnect. Sometimes, can just switch the ignition off and back on and get at steady green, but that is rare. It tried to flash the ECU the first time, but the program light came on solid red, then turned off after about 15 seconds. Now, I am getting a steady green for about 2 to 3 seconds, then it flashes off for a brief moment and comes back on and repeats. There are periodic quick flashes from the datalog light maybe every 5 seconds. I can not get it to flash the ECU. The ECU is throwing up the normal VSA and emissions errors it throws if the flash was not completed. Any suggestions on what I should look at? I'm wondering if maybe I have a voltage issue with my battery?

User avatar
R-12914
Posts: 348
Joined: Sun Dec 01, 2013 12:13 pm
Location: Germany/Bavaria

Re: Flashpro LED Display

Post by R-12914 » Mon Apr 01, 2019 3:03 am

2008 Honda Civic TypeR FN2
Rotrex C30-94 supercharged with relocated IAT
Powered by ASNU 092/FP330E fuel pump & ASNU 090/750cc fuel injectors
------------------------
ECU: 37820-RSP-E03
Flashpro: FP-SI-INT-21153
Software: 3.4.4.0
Firmware: 167

Post Reply