Hi.
I have two honda civic FB6 2014 and the check P0455 and P0456 is generated every three or four weeks.
the two cars have RBC swap and this check is disabled in the tuning .. but still the check is generated
Here I copy the check images and the calibration that I am using
FB6 2015 and the check P0455 and P0456
FB6 2015 and the check P0455 and P0456
- Attachments
-
- cal
- cal.bmp (364.69 KiB) Viewed 4070 times
-
- check
- check.bmp (329.79 KiB) Viewed 4070 times
Re: FB6 2015 and the check P0455 and P0456
We are looking into this.
Re: FB6 2015 and the check P0455 and P0456
hi Hondata.. any Update ?
Re: FB6 2015 and the check P0455 and P0456
I have no updates at this time.
-
- Posts: 19
- Joined: Tue Dec 19, 2017 10:59 pm
Re: FB6 2015 and the check P0455 and P0456
I have the same issue as well its super annoying, I thought it was a legit issue and replaced the purge solenoid valve and the gas cap. Still didn't fix it, what a waste.
Re: FB6 2015 and the check P0455 and P0456
hi Hondata.. any Update ?
It's been too long to correct a software error ... !!!
It's been too long to correct a software error ... !!!
Re: FB6 2015 and the check P0455 and P0456
Sometimes when you disable the error in the ECU if the operation is vital to the ECU it will still set the code.
Hondata
Re: FB6 2015 and the check P0455 and P0456
okay. I do not understand .. jajaja
What would be the correct way to deactivate the error?
can you explain to me .. I am a systems engineer and softwarer.
I understand that a correction must be made so that the error no longer appears when the sling is deactivated
What would be the correct way to deactivate the error?
can you explain to me .. I am a systems engineer and softwarer.
I understand that a correction must be made so that the error no longer appears when the sling is deactivated