Made -3% adjustments to the same range last night, and took a very long datalog this morning of most of my ride to work.
Here is the ShortTermFT graph:
- 3perADJSpectrum.jpg (226.04 KiB) Viewed 3020 times
Here is LongTermFT graph:
- 3perADJSpectrumLTFT.jpg (190.33 KiB) Viewed 3020 times
Just made a few more minor adjustments:
From 1.1V to 1.2V I adjusted another -5%
From 1.2V to 1.3V I adjusted another -3%
From 1.6V to 1.7V I adjusted 3%
Hoping this will make my 0.0V to 2.0V very linear right around 0%
Looks like the top end (2.4V - 3.5V) needs to be a tad richer, but I will work on that end once I get the low end flattened out.
Now that being said, is there any other parameter/sensor I should be watching now that I am messing with the AFM? Does AFM indirectly affect something else in the ECU that I should monitor?