Ignition +6psi EU model

Civic 2016+ 1.5 Turbo
Post Reply
topcatdk
Posts: 8
Joined: Wed Jan 06, 2021 8:29 pm

Ignition +6psi EU model

Post by topcatdk »

Hi

My ignition is jumping a lot up and down under full throttle.
I'm using 100 octane and +6psi calibration.
Also tried with +3psi, same problem.
No problem in stock mode.

Any ideas?
ignition.png
ignition.png (68.73 KiB) Viewed 1939 times
User avatar
Hondata
Site Admin
Posts: 10434
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: Ignition +6psi EU model

Post by Hondata »

Please post the datalog so we can see the knock retard.
Hondata
topcatdk
Posts: 8
Joined: Wed Jan 06, 2021 8:29 pm

Re: Ignition +6psi EU model

Post by topcatdk »

Here you go :)
Attachments
datalog0005.fpdl
(53.07 KiB) Downloaded 80 times
datalog0001.fpdl
(96.65 KiB) Downloaded 88 times
User avatar
Hondata
Site Admin
Posts: 10434
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: Ignition +6psi EU model

Post by Hondata »

You are using fairly old software - I would update that first.

There's a lot of knock retard and the knock control is high. Seems more like 95 octane than 100 octane.
Hondata
topcatdk
Posts: 8
Joined: Wed Jan 06, 2021 8:29 pm

Re: Ignition +6psi EU model

Post by topcatdk »

Hi

I'll try updating.
And if that not changes anything then use Shell V power instead of normal 100 octane.
topcatdk
Posts: 8
Joined: Wed Jan 06, 2021 8:29 pm

Re: Ignition +6psi EU model

Post by topcatdk »

Software upgraded to latest non-beta and Shell v-power 100 octane.
Fuel tank was as low as it could be before refueling, and datalog was made after 1/2 tank of the new fuel.
Attachments
datalog0010.fpdl
(54.01 KiB) Downloaded 81 times
topcatdk
Posts: 8
Joined: Wed Jan 06, 2021 8:29 pm

Re: Ignition +6psi EU model

Post by topcatdk »

Dyno if that can be useful...
amCharts.png
amCharts.png (124.46 KiB) Viewed 1894 times
User avatar
Hondata
Site Admin
Posts: 10434
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: Ignition +6psi EU model

Post by Hondata »

Have you disabled the artificial knock? (under modifications).
Hondata
topcatdk
Posts: 8
Joined: Wed Jan 06, 2021 8:29 pm

Re: Ignition +6psi EU model

Post by topcatdk »

No, I Guess I should do that? 🤪
User avatar
Hondata
Site Admin
Posts: 10434
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: Ignition +6psi EU model

Post by Hondata »

Yes. That probably is cause of the the knock control rise.
Hondata
topcatdk
Posts: 8
Joined: Wed Jan 06, 2021 8:29 pm

Re: Ignition +6psi EU model

Post by topcatdk »

That didn't change much.
Does it take some time to take effect?
Attachments
datalog0012.fpdl
(50.22 KiB) Downloaded 81 times
User avatar
Hondata
Site Admin
Posts: 10434
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: Ignition +6psi EU model

Post by Hondata »

Yes it did - the knock control is much lower now.
Hondata
topcatdk
Posts: 8
Joined: Wed Jan 06, 2021 8:29 pm

Re: Ignition +6psi EU model

Post by topcatdk »

But the ignition * is still going from -5 to +5 under full load?
Is that okay?
With standard calibration its almost flat.
Post Reply