S300 V3 output protocols

HondaLogger datalogging software questions and answers.
Post Reply
Posts: 11
Joined: Sat Feb 09, 2019 4:07 pm

S300 V3 output protocols

Post by brausepaul15 »


I want to integrate the S300 logging data into my logging application. I am wondering which protocol I should use.

1. Most common way would be to use the serial output. But isn't it possible to access the data of the analog and digital pins? They are not listed in the reference (https://www.hondata.com/help/smanager/s ... format.htm).

2. CAN output includes the analog and digital inputs but I cannot find some specific data like brake switch or MIL (https://www.hondata.com/help/smanager/can_output.htm).

3. Bluetooth seems to offer all of the data available on the S300 (https://www.hondata.com/downloads/Bluetooth.pdf).

Is it really necessary to use Bluetooth do have access to all the data mentioned or are there ways to access the data mentioned by a serial connection?
User avatar
Site Admin
Posts: 21389
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: S300 V3 output protocols

Post by Spunkster »

Yes Bluetooth is the only way to get all the data.
Post Reply