KManger crashed, cant connect or upload without internet connection

K-Series Programmable ECU installation questions / support issues
Post Reply
Furious
Posts: 30
Joined: Sun Jun 17, 2012 4:22 am

KManger crashed, cant connect or upload without internet connection

Post by Furious »

Hello,
I have already reported the issue on below topic, but remained unanswered:
viewtopic.php?t=24949

- Honda Civic 92-95 and other
- sn: 44186 and other
- 4.5.1.0 (started on 4.4.9)
- 37820-PRA-E02 and other
- Windows 7 x64

Issue started to happen from KManager 4.4.9 on different KPRO v4 boards. When I try to start datalogging or upload to ECU, KManager hang with attached error (I have reported the error using Send Error Report). The error continues until the computer is connected to the internet.
Could you please explain why internet connection is needed to use KManager?

Thank you
Attachments
hondata-blad.jpg
hondata-blad.jpg (3.07 MiB) Viewed 642 times
User avatar
Hondata
Site Admin
Posts: 10434
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: KManger crashed, cant connect or upload without internet connection

Post by Hondata »

With KPro before KPro4, don't download from the KPro unless you have to. Rather open the calibration on the laptop instead. Certainly you should never need to upload to the KPro and then immediately download from the KPro.
Hondata
Post Reply