09 Si help with hybrid racing intake tune.

FlashPro questions & answers specific to the 2006-2011 Americas Civic Si
akanep16
Posts: 64
Joined: Mon Feb 07, 2022 6:19 am

Re: 09 Si help with hybrid racing intake tune.

Post by akanep16 »

Sweet that’s good to hear I was getting nervous! And I thought I was in open loop I was asking how to get back close but I guess it did it on its own and yes that is my setup for a while! I am ready to tune it.
EFICU
Posts: 3295
Joined: Mon Feb 25, 2019 10:14 pm

Re: 09 Si help with hybrid racing intake tune.

Post by EFICU »

Yeah it all looks good. I'll keep an eye on everything as we go, but it looks fine so I don't see any issues.

Here is the first calibration. This is the 0* cam angle with vtec at 4500. Same datalogs like you've been doing, twenty minutes or so and the one third gear WOT pull. The 0* cam is kind of boring, so don't get discouraged when it doesn't feel strong.
akanep16.SD.V2.Rev01 (0Cam)(Vtec4500).fpcal
(21.08 KiB) Downloaded 71 times
akanep16
Posts: 64
Joined: Mon Feb 07, 2022 6:19 am

Re: 09 Si help with hybrid racing intake tune.

Post by akanep16 »

So I have the Hondata app on my phone to monitor some things while I drive and I noticed the O2 voltage steadily goes from .3 or so up to between 4.0 and 5.0 and then back down. Does that sound bad to you.
EFICU
Posts: 3295
Joined: Mon Feb 25, 2019 10:14 pm

Re: 09 Si help with hybrid racing intake tune.

Post by EFICU »

The voltage will oscillate as you drive. that's how it sends it's reading to the ECU. It converts volts to AFR.
akanep16
Posts: 64
Joined: Mon Feb 07, 2022 6:19 am

Re: 09 Si help with hybrid racing intake tune.

Post by akanep16 »

Ahh I see, thank you!
akanep16
Posts: 64
Joined: Mon Feb 07, 2022 6:19 am

Re: 09 Si help with hybrid racing intake tune.

Post by akanep16 »

Well here is the datalog with 0-degree cam angle!
Attachments
07 march22.fpdl
(561.23 KiB) Downloaded 61 times
EFICU
Posts: 3295
Joined: Mon Feb 25, 2019 10:14 pm

Re: 09 Si help with hybrid racing intake tune.

Post by EFICU »

Yeah it looks really good for a start. Unfortunately I didn't see a clean third gear WOT pull from 2500-8600 in the datalog. We'll need to make another one with the clean third gear pull so I can finish the 0* cam table. You can take it for a ten minute datalog on this one, we really just need the clean third gear pull from 2500-8600.
akanep16.SD.V2.Rev02 (0Cam)(Vtec4500).fpcal
(21.59 KiB) Downloaded 63 times
akanep16
Posts: 64
Joined: Mon Feb 07, 2022 6:19 am

Re: 09 Si help with hybrid racing intake tune.

Post by akanep16 »

I got it heres a clean pull.
Attachments
08march22.fpdl
(511.97 KiB) Downloaded 57 times
EFICU
Posts: 3295
Joined: Mon Feb 25, 2019 10:14 pm

Re: 09 Si help with hybrid racing intake tune.

Post by EFICU »

Okay that one looks great. We will now move to the 15* cam angle with vtec at 4500. Go back to the twenty minute datalogs with stop and go driving, and a clean third gear WOT pull from 2500-8600. We'll see how it looks.
akanep16.SD.V2.Rev03 (15Cam)(Vtec4500).fpcal
(21.36 KiB) Downloaded 55 times
akanep16
Posts: 64
Joined: Mon Feb 07, 2022 6:19 am

Re: 09 Si help with hybrid racing intake tune.

Post by akanep16 »

does this look ok? I always get cut off on my 3rd gear pulls lol.
Attachments
08 march 15 degree.fpdl
(1.46 MiB) Downloaded 58 times
EFICU
Posts: 3295
Joined: Mon Feb 25, 2019 10:14 pm

Re: 09 Si help with hybrid racing intake tune.

Post by EFICU »

No problem on coming up short, I worked with it. Better to be safe on the road than risk it by running it out. We will now move to the 30* cam angle with vtec at 4500 again. Take this one for the same type of datalog and driving style. And tell everyone on the road to stay out of your way. Haha.
akanep16.SD.V2.Rev04 (30Cam)(Vtec4500).fpcal
(21.83 KiB) Downloaded 51 times
akanep16
Posts: 64
Joined: Mon Feb 07, 2022 6:19 am

Re: 09 Si help with hybrid racing intake tune.

Post by akanep16 »

well here it is. I couldnt get a pull on first log so i tried again. Every road where I live unfortunately is full of traffic lol.
Attachments
datalog0002.fpdl
(667.52 KiB) Downloaded 52 times
09 march 30 cam.fpdl
(694.69 KiB) Downloaded 58 times
EFICU
Posts: 3295
Joined: Mon Feb 25, 2019 10:14 pm

Re: 09 Si help with hybrid racing intake tune.

Post by EFICU »

Yeah it looks really good. We will now move to the 40* cam angle with vtec at 5500. For this one, you can do a ten minute datalog, just be sure to get a clean third gear WOT pull as best you can. And try to run it out to at least 8000, tell all the people in traffic to move out of the way. Haha. Just kidding, be safe.
akanep16.SD.V2.Rev05 (40Cam)(Vtec5500).fpcal
(22.24 KiB) Downloaded 55 times
akanep16
Posts: 64
Joined: Mon Feb 07, 2022 6:19 am

Re: 09 Si help with hybrid racing intake tune.

Post by akanep16 »

Hey I’m sorry I ended up having to go out of town so I’ve not been around my car but when I’m back next week I’ll get you the log for that one! I’ll have to find a better street and actually get a 3rd gear pull lol
EFICU
Posts: 3295
Joined: Mon Feb 25, 2019 10:14 pm

Re: 09 Si help with hybrid racing intake tune.

Post by EFICU »

No problem, we'll get back to it when you have time.
Post Reply