Help! Knock control 100 and knock at idle

Calibrations for FlashPro Manager - Use all calibrations at your own risk (dyno tuning recommended)

Post Reply
codyFB6
Posts: 32
Joined: Sat Mar 05, 2022 12:29 pm

Help! Knock control 100 and knock at idle

Post by codyFB6 »

Hey guys,

Looking to see if anyone has any suggestions. I was recently tuned everything seemed fine then we went through and did a more in-depth tune to really polish it out and then all of sudden started getting knock occurrences at idle. I can drive around and don’t really see any knock but the last drive I took I had been getting KR most times that the car saw any load. I can attach tune file and logs if anyone would want to look more in-depth.

What I am looking for is if someone would know why my knock control had hit 100 while not getting actual knock while driving. Why I am getting knock at idle after the car was not for a little bit. The only change was I got gas a few days before this had occurred I use 93 from a “top tier” station. Now my app says my knock control is at 0% after hitting 100. My last log states 100% while app was reading 0.
Post Reply