K24 turbo basemap need help

K-Series Programmable ECU Calibration updates / downloads
Post Reply
Bngo24
Posts: 1
Joined: Tue May 31, 2022 10:36 pm

K24 turbo basemap need help

Post by Bngo24 »

Hello everyone, putting the finishing touches on my eg hatch and need a base map to get it running to check for leaks. Basic setup k24a longblock 3 lobe with type s oil pump and *50 vtc. Turbo is gtx3576r with dual 44mm Wastegates set at 7 psi, 1650cc fid injectors, mac 3 port installed and wired into b21, ethanol sensor installed but currently only 93 octane in the tank, aem 3.5 bar map sensor, aem x series wideband 30-0300 wired into Kpro. No iacv. Attached is deadtimes for the injectors. Any and all help is appreciated. 02 crv 5 speed trans with vss.
Fid 1650 deadtimes
Fid 1650 deadtimes
B432D54F-F905-4307-8DD1-3542212D38DE.jpeg (218.66 KiB) Viewed 4406 times
Post Reply