Lambda Overlay Targets

Place your display templates here with a screen shot of it for previewing.
Post Reply
Themyth
Posts: 5
Joined: Sat Aug 17, 2019 7:13 pm

Lambda Overlay Targets

Post by Themyth »

How can I have more than 3 desired target values for load columns? Settings will only allow 3 values - low/mid/high loads. I have attached a couple pictures for examples. 1 - is of the 3 allowed load settings. 2 - is of a map that has numerous target columns. I'm trying to figure out how I can duplicate that method and input my desired target values in numerous columns. I have tried numerous things and have been unsuccessful.
Attachments
20221228_111147.jpg
20221228_111147.jpg (4.06 MiB) Viewed 3457 times
20221228_110932.jpg
20221228_110932.jpg (4.01 MiB) Viewed 3457 times
Themyth
Posts: 5
Joined: Sat Aug 17, 2019 7:13 pm

Re: Lambda Overlay Targets

Post by Themyth »

I need to be able to do this for K-Manager and S-Manager.

Thank you!
Themyth
Posts: 5
Joined: Sat Aug 17, 2019 7:13 pm

Re: Lambda Overlay Targets

Post by Themyth »

The attached picture is what I get when i change values in the settings. It only allows me to have 3 values. This is what I'm trying to work around.
Attachments
20221228_163755.jpg
20221228_163755.jpg (4.63 MiB) Viewed 3453 times
User avatar
Spunkster
Site Admin
Posts: 22741
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: Lambda Overlay Targets

Post by Spunkster »

You cannot change this as that is how it designed.
Post Reply