K24A IACV

K-Series Programmable ECU installation questions / support issues
Post Reply
FujiSpecs
Posts: 2
Joined: Fri Dec 24, 2021 5:59 am

K24A IACV

Post by FujiSpecs »

Hello we have a K24A in a miata and we are running it with a Kpro4 and a 02-04 rsx loom but the IACV doesn't work also the IACV is brand new from Honda, we have changed the ecu with a PRB and again nothing. I have tested the wires they are correct A12 pin for the control and 12v supply and a ground
Screen-Shot-2020-03-22-at-5-00-42-PM.png
Screen-Shot-2020-03-22-at-5-00-42-PM.png (64.8 KiB) Viewed 574 times
according to this which i found on internet can someone help? Is there any reason it doesn't idle due to base map? or any other reason?

Thanks in advance
User avatar
Spunkster
Site Admin
Posts: 22740
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: K24A IACV

Post by Spunkster »

You have not posted your calibration.
FujiSpecs
Posts: 2
Joined: Fri Dec 24, 2021 5:59 am

Re: K24A IACV

Post by FujiSpecs »

That's the calibration, sorry, can you confirm that this is the correct way to wire the K24A IACV? the part number is
16022-RAA-A01

Thanks in advance
Attachments
Mx5-K24 Safe.kal
(14.79 KiB) Downloaded 46 times
Post Reply