FlashPro Requests

FlashPro Manager software
myuser
Posts: 77
Joined: Sat Jun 27, 2009 6:55 am

Re: FlashPro Requests

Post by myuser »

Improvements:
1- Buttons in graph
- Toggle / Show in full screen / Show graph with table, in this way maximizing space)
- Allow to change cams in graph when analyzing graphs, in small resolutions the graph needs to maximized to have a better perception;
- And/Or Add to keyboard shortcuts this functions;

2 - Overlay any sensor
In this way the possibility to see knock or other information.
For example:
- See any area that could have high noise or knock;
- See in fuel map the use of a cam angle;
- See in ignition or fuel map a specific sensor (ECT, INJ, CAM, CAM CMD, K#1..#6, AF Corrected, AFM, AFM.c, Duty,...)

3 - Datalog Resume Button
In this way, have for any specific sensor in the template:
- The Sum;
- The Average / Variation;
- The Count / total values for sensor;
- Min, Max (could be used to adjust the sensor min, max before ploting the datalog values).
myuser
Posts: 77
Joined: Sat Jun 27, 2009 6:55 am

Re: FlashPro Requests

Post by myuser »

Improve Lambda Overlay Tooltip and other information
  • Tooltip is always active if change by keyboard shortcut, for example Shift+F3, Tooltip visible, Shift+F2, Tooltip stuck;
  • Add in the tooltip information like: Sensor Overlay, Fuel Cell Value, Ignition Cell Value and Cam Value;
  • Add tooltips for other tables, minimizing changing table or changing cam tables;
  • Place the tooltip in Ignition and Cam tables;
  • Possibility to add to the tooltip more sensors;
  • Ability to calculate Overlay Data from a folder of datalogs and not only use the current datalog;
Tables that are in use
  • Add some indication on the cells in the tables of the Calibration that the value selected is being used, or select only the tables that are in use.
    For example: Some tables are with the cells selected, but the conditions to use that table aren't meted...
    Low Cam and High Cam values selected, another example: WOT tables selected and conditions aren't meted.
myuser
Posts: 77
Joined: Sat Jun 27, 2009 6:55 am

Re: FlashPro Requests

Post by myuser »

Power Button enable Function
Use the start button to display a certain sensor in the revs and parameterizable on the map.
This button can work in the same way as the Cruise Control button to read the Lambda, allowing the applicability of the function in more vehicles and making it possible to choose more sensors.
It only works after the vehicle is running and pressing the button again would activate or deactivate the function.

It can also be used to place another map that is in memory or a specific parameter (ON/OFF) while engine is running.
Hondaliebe
Posts: 1
Joined: Mon May 29, 2023 4:18 am

Re: FlashPro Requests

Post by Hondaliebe »

Im also requesting the FK2 downshift Rev match - i know lots of people who are interested in that feature!
myuser
Posts: 77
Joined: Sat Jun 27, 2009 6:55 am

Re: FlashPro Requests

Post by myuser »

Real-time Graph in Display
Ability to add a new control to Display in order to show the graph in real-time.
Or choose a Graph Template as new control in Display.
KT7788
Posts: 43
Joined: Sat Jun 06, 2020 8:44 am

Re: FlashPro Requests

Post by KT7788 »

FK2 downshift Rev match

Please ! lets us enjoy this feature like the FK8.........

Please
myuser
Posts: 77
Joined: Sat Jun 27, 2009 6:55 am

Re: FlashPro Requests

Post by myuser »

In the FlashPro -> Datalogging -> a (New Button) "Save All" .
This option will Save the all the Datalogs and use the Directory and parameters in Settings under Datalog.
fas-n-furyus
Posts: 1
Joined: Sat Apr 27, 2013 5:19 pm

Re: FlashPro Requests

Post by fas-n-furyus »

For FL5
The ability to DIASABLE second coolant temperature sensor (ECT2) for radiator fan control.
So it uses ECT to control the radiator fans.

Need similar options just like what is there for the FK8's
18abu9
Posts: 3
Joined: Sat Jul 29, 2023 12:07 am

Re: FlashPro Requests

Post by 18abu9 »

I am after a MIL light output for my build.
I am using an aftermarket dash (non honda). Would I be able to get a dissused output of my ecu to control a led MIL light.
I have an 37820-rbb-a71 ecu from an AT TSX.
I am using this in a Locost (Lotus 7 clone) which is using the K24a2 and an NB MX5(miata) 5 speed manual gearbox.
I will be using a flex sensor (so oxy sensor 2 input is being used), as well as the traction control module.
Maybe it would be best to use one of the disused AT outputs?

Any help would be great

Regards

Simon
myuser
Posts: 77
Joined: Sat Jun 27, 2009 6:55 am

Re: FlashPro Requests

Post by myuser »

Downshift Rev match and Multi-tune for Si, FN2, FK2.

Add Multi-tune options:
  • Limit VSS - Enable to restrict speed. In this way implementing Valet Parking and Speed limits;
  • Rev Limit - Implementing similar to speed, but by Rev;
  • Throttle Limit - Implement cut off throttle at specific rpm, in this way able to press all the way the pedal and achive certain rpm points;
  • Throttle Sensitivity - Adjust throttle sensitivity in a percentage, in this way add various stages of sensitivity;

Allow to change on-the-fly the presets in the Multi-tune, indicating by a light in Dashboard (edit mode) that the current value is about to be set.
After confirming the light should go off (view mode).

Keep up the good work.
Thanks.
thesilverbullet
Posts: 128
Joined: Wed Dec 17, 2003 3:11 pm
Location: SC

Re: FlashPro Requests

Post by thesilverbullet »

add misc. parameter to disable auto stop/start option for US calibrations
Disable Auto Stop/Start
Disable Auto Stop/Start
autostopstart.JPG (21.74 KiB) Viewed 24159 times
'24 ITR Tiger Eye coming soon...
'23 RDX SH-AWD
'07 S2K w/ JVT header, Berk 3" header back w/ TP Exhaust, AEM V3 CAI & Flashpro
'02 RSX-S w/cai/exhaust/dcrh/kpro - SOLD
rainy187
Posts: 34
Joined: Wed Nov 09, 2022 12:26 pm

Re: FlashPro Requests

Post by rainy187 »

For 2018 Accord 2.0T AT
1) radiator fan option
2) VTS option like the 2021 Accord 2.0T AT has
3) bring back the ECT Ethanol crank option back
Deebo
Posts: 8
Joined: Tue Oct 31, 2017 8:57 am

Re: FlashPro Requests

Post by Deebo »

2009-2015 Honda Civic Si (equipped with Drive By Wire Throttle)
Downshifts throttle rev match / Throttle auto blip
Please 🙏🏽
Deebo
Posts: 8
Joined: Tue Oct 31, 2017 8:57 am

Re: FlashPro Requests

Post by Deebo »

Nitrous control, please.
rainy187
Posts: 34
Joined: Wed Nov 09, 2022 12:26 pm

Re: FlashPro Requests

Post by rainy187 »

Please add radiator fan control for 2018+ Honda Accord, civic has it why can't Accord have it as well?
Post Reply