ECT.c (+)

s300 and SManager software questions & answers
Locked
Shadow!
Posts: 17
Joined: Wed Apr 06, 2005 4:46 am
Location: Siberia, Russia

ECT.c (+)

Post by Shadow! » Wed Mar 08, 2006 9:52 am

What the strange behaviour of ECT.c ? (ECT value nearly constant)
Because "throttle tip" is 10% ?

What the best value "throttle tip" for NA H22A ?

Thanks.

Image

User avatar
Spunkster
Site Admin
Posts: 18059
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Post by Spunkster » Wed Mar 08, 2006 10:21 am

Post the calibration and the datalog so that it can be better examined.

Jaker
Posts: 139
Joined: Thu Dec 05, 2002 12:37 pm
Location: Vancouver, BC
Contact:

Post by Jaker » Wed Mar 08, 2006 5:03 pm

If that was a datalog of a drive, and you started out dataloging with the engine fully warmed up, that is perfectly normal. The engine coolant thermostat is in place to maintain a constant engine temperature, and yours appears to be doing its job rather well.

Actually now that I look at your datalog again, its your IAT (intake air temperature) that is almost completely constant. That is a little unusual, but what's more unusual is the large variations in your coolant (ECT) temps. They should be more constant than that, unless you have a really small window of information selected.

Shadow!
Posts: 17
Joined: Wed Apr 06, 2005 4:46 am
Location: Siberia, Russia

Datalog and calibration

Post by Shadow! » Wed Mar 08, 2006 8:20 pm

Datalog and calibration
Attachments
Current.skl
(16.5 KiB) Downloaded 42 times
13.s3d
(1.02 MiB) Downloaded 41 times

User avatar
Spunkster
Site Admin
Posts: 18059
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Post by Spunkster » Thu Mar 09, 2006 10:20 am

The problem is that your IAT compensation tables start at -40 and go to only 3 degrees F, and your ECT compensation tables start at -40 and only go as high as 19 degrees F. Open a new calibration and compare it to yours.

Shadow!
Posts: 17
Joined: Wed Apr 06, 2005 4:46 am
Location: Siberia, Russia

Post by Shadow! » Thu Mar 09, 2006 10:27 am

Thank you very much !

What about throttle tip value ? What you recommend in my case ?

User avatar
Spunkster
Site Admin
Posts: 18059
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Post by Spunkster » Thu Mar 09, 2006 12:13 pm

Throttle tip in is somethign you will have to experiment with.

Locked