No Power to Flashpro
No Power to Flashpro
Good afternoon, I have the flashpro OG model and for some reason it is not getting any power to the obd2 port. A normal obd2 scanner will power on but I can’t figure out why flash pro isn’t receiving power. Power does come on when connected to the laptop though. Any thoughts here? I have checked all fuses in and out of the car with no luck. :(
Re: No Power to Flashpro
Have you tried plugging the FlashPro into a different vehicle to see if it powers up then?
Re: No Power to Flashpro
Hey there,
Yes I tried plugging it up to another vehicle with the same issue :( it will power with the usb plugged into a laptop though. Maybe the cord is fried? Is there anything I can do? I tried cleaning the prongs but it didn’t help. Not sure what else I can do
Yes I tried plugging it up to another vehicle with the same issue :( it will power with the usb plugged into a laptop though. Maybe the cord is fried? Is there anything I can do? I tried cleaning the prongs but it didn’t help. Not sure what else I can do
Re: No Power to Flashpro
What is the FlashPro serial number?
Re: No Power to Flashpro
It is:
FP-2012SI-114067
FP-2012SI-114067
Re: No Power to Flashpro
Send an email to support <at> hondata.com with the following and I will issue an RMA and give you further
instructions:
Name:
Address:
Phone:
Email:
Serial#:
Description of problem:
Include a link to this thread.
instructions:
Name:
Address:
Phone:
Email:
Serial#:
Description of problem:
Include a link to this thread.
Re: No Power to Flashpro
Thank you again for your help! Reached out to the Hondata team and turns out my OBD2 plug was fried. They got it back to me quickly and works like a charm now. Thank you!! :)