Hey I have a h23a swapped crv with a hondata cpr I’ve installed all of the wires correctly on it but I still seem to not have any spark I tried spark plugs grounded but there’s still no spark my lights work perfectly I have constant power ignition on 1 second and the sync works at 2 seconds I have brand new coils and spark plugs and there’s no spark I did a base map and enabled the cpr.
if anyone can please give me any info on this problem I will appreciate it thank you.
No spark hondata H23A
Re: No spark hondata H23A
Are the sync and ign solid or flashing?
-
- Posts: 4
- Joined: Wed Feb 21, 2024 4:31 pm
Re: No spark hondata H23A
They are flashing when I turn ignition
Re: No spark hondata H23A
Was there spark before installing the CPR?
-
- Posts: 4
- Joined: Wed Feb 21, 2024 4:31 pm
Re: No spark hondata H23A
No it didn’t have any spark at first
Re: No spark hondata H23A
It sounds like there may be some other issues then as you should have it running before trying to install the CPR.
-
- Posts: 4
- Joined: Wed Feb 21, 2024 4:31 pm
Re: No spark hondata H23A
Yea the thing is that I bought the engine with the car and I did the swap but I’ve never turned the car on before so it’s the first time
Re: No spark hondata H23A
You need to get it running then without the CPR first.