So I got my hondata for the first time and very normally I was excited to reflash my car with the base hondata reflash. Mid reflash mis stopped for the first time I due to my battery that was basically dead and being held on by a maintainer at around 11.6v or so, long story short my ECU has been in recovery mode for like 3 weeks now I’ve tried throwing a different battery( not new) and using a jump
Pack with and a maintainer and once me and my buddy got it to load to about 98% and then it dropped. My Ecu is litteraly blank I’m pretty sure because I can’t unmarry hondata it says it doesn’t read the vin but it appears in the history. I know my Ecu still
Works bc I can use obd2 and a check engine light still appears in accessory mode so I don’t know what to do, I will continue to try and see what happened but I need help!!!!
It says to check my obd2 pins every time it stops but I’m not moving and my Obd2 plug works I use. My scanner no issue
I have the hondata Mini
Ecu in recovery mode won’t reflash
-
- Posts: 4
- Joined: Sun Mar 03, 2024 1:43 pm
Ecu in recovery mode won’t reflash
- Attachments
-
- IMG_0704.jpeg (3.7 MiB) Viewed 3220 times
-
- IMG_1371.jpeg (2.32 MiB) Viewed 3221 times
-
- IMG_1370.jpeg (2.41 MiB) Viewed 3221 times
Re: Ecu in recovery mode won’t reflash
With everything plugged in and the ignition in the on position, go to the Help menu and click on “send feedback”. Include a detailed description of the issue.
-
- Posts: 4
- Joined: Sun Mar 03, 2024 1:43 pm
-
- Posts: 4
- Joined: Sun Mar 03, 2024 1:43 pm
Re: Ecu in recovery mode won’t reflash
What is the serial number? People send us the feedback all the time so we need something to be able to match it up.
Hondata
Re: Ecu in recovery mode won’t reflash
check your email for the response.
-
- Posts: 4
- Joined: Sun Mar 03, 2024 1:43 pm
Re: Ecu in recovery mode won’t reflash
replied via email