On cold start my TPS is at (2%) .55 volts and the idle fluctuates during warm up. After warm up the TPS is at (3%) .57 volts
according to this:
http://www.hondata.com/techidle.html
it should be at .45 volts (0%) or less. How do I asjust it. I have the s200 with data logging.
Thanks
TPS voltage problem
http://www.hondaswap.com/~pills/obd1guide.html
it's toward the bottom of that page.
but basically you need to loosen it and rotate it like distributor to change the voltage it sends
it's toward the bottom of that page.
but basically you need to loosen it and rotate it like distributor to change the voltage it sends
www.hondaswap.com
94 del sol
94 del sol