Will one of these work, or what has to be done to get it to work???
http://honda-tech.com/zerothread/1703136
I am running an S200 on an EG w/ P28 ECU
Motorola 2.5 MAP
-
- Posts: 14
- Joined: Mon Feb 27, 2006 11:37 pm
Well I searched the internet for Motec MAP sensors and could'nt find anything but the pigtails. Are these Haltech ones the same( They pop'd up in the search for Motec ones)? They look very similar to GM 3bar maps. Whats the diffrence if you dont mind me asking? Thanks for the help so far guys :)
Here is the link http://www.tweakit.net/shop/index.php?c ... ed4c5dc9b8
Here is the link http://www.tweakit.net/shop/index.php?c ... ed4c5dc9b8
go to summitracing
part number MSD-2313
MAP Sensor, Bosch-Style, 3-Bar, Stock Style, Each
Quality MAP sensors from MSD.
The pressure inside your intake manifold is extremely important input to the ECU. A quality MAP sensor like MSD's is crucial to your engines performance. These sensors will respond to changes in manifold pressures and relay the information to the ECU in the form of a voltage signal ranging from about 1 to 5 volts. They're available in several different versions for naturally aspirated engines as well as engines with forced induction.
$53US
i use them on both boosted and NA cars... as they are easy to get.
my 2cents...
and get this if you plan to go for it
MSD-8172 makes for a better install
part number MSD-2313
MAP Sensor, Bosch-Style, 3-Bar, Stock Style, Each
Quality MAP sensors from MSD.
The pressure inside your intake manifold is extremely important input to the ECU. A quality MAP sensor like MSD's is crucial to your engines performance. These sensors will respond to changes in manifold pressures and relay the information to the ECU in the form of a voltage signal ranging from about 1 to 5 volts. They're available in several different versions for naturally aspirated engines as well as engines with forced induction.
$53US
i use them on both boosted and NA cars... as they are easy to get.
my 2cents...
and get this if you plan to go for it
MSD-8172 makes for a better install
-
- Posts: 14
- Joined: Mon Feb 27, 2006 11:37 pm