ROM Editor 4 tuning software questions and answers.
- Posts: 14
- Joined: Tue Jul 29, 2008 5:34 pm
On Nitrous/Aux 2, to use A20 (PCS) output to activate a nitrous relay, what needs to be done to Q31? It is a US P75 ECU. Tried it without changing anything on the board but it will not activate the relay.
Thanks in advance
- Site Admin
- Posts: 19727
- Joined: Fri Sep 20, 2002 5:06 pm
- Location: Hondata
Nothing should have to be done to the ecu for this to work.
This has been tested and is working in the software as it is supposed to. Without a calibration and datalog showing the problem it is impossible to determine what the problem may be.