MIL light on decel intermittent
MIL light on decel intermittent
My MIL comes on during fuel cut on decel, the code is 02 sensor high/low voltage. Its a brand new 02 but tested it anyways and it checks out. None of the connectors are corroded and there is 0 resistance back to the terminal connector for the ecu. It dosent happen all the time either. Should i take it back to get re-tuned? It dosent seem to affect the operation at all either. The light comes on but A/F ratios are what they should be and so is the 02 input. any ideas?