s200 launch control issue

Hondata installation questions / answers / issues.
Locked
PaulD
Posts: 3
Joined: Thu Aug 13, 2009 12:29 pm
Location: Riverside

s200 launch control issue

Post by PaulD »

I just recently added the launch control to my car and had to make a bracket for the new clutch switch I had gotten. Now my cars rev limiter is at 6000 when it was at 9300 before and I don't know what to do to fix it. If unplug the clutch switch will it go back to normal? Help please thanks!
User avatar
Spunkster
Site Admin
Posts: 22737
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Post by Spunkster »

You are hitting the full throttle shift limiter. You either need to change that to the same as your overall revlimiter or unplug your clutch switch.
PaulD
Posts: 3
Joined: Thu Aug 13, 2009 12:29 pm
Location: Riverside

Post by PaulD »

how do you go about changing it? thanks
User avatar
Spunkster
Site Admin
Posts: 22737
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Post by Spunkster »

Was it tuned with Romeditor 3 or Romeditor 4?
PaulD
Posts: 3
Joined: Thu Aug 13, 2009 12:29 pm
Location: Riverside

Post by PaulD »

It was about 3yrs ago that i got it done so maybe romeditor 3 if 4 wasnt out then is there anyway i would beable to see if was either?
User avatar
Spunkster
Site Admin
Posts: 22737
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Post by Spunkster »

If it was tuned on Remeditor 3 then follow the instructions in the s200 User's Guide.

http://www.hondata.com/downloads/S200%2 ... 0Guide.doc
Locked