I've never had a problem activating it on a switch. Even when I had an msd 7AL 2(which has about the worst RF interference out there) mounted
right next to the ecu. LOL I had sprk issues, but the datalog always worked off of the switch.
S300 with M&W Pro10 problems
-
- Posts: 8
- Joined: Tue Jan 19, 2010 10:03 am
- Location: Cayman Islands
-
- Posts: 170
- Joined: Sun Nov 19, 2006 12:10 am
-
- Posts: 8
- Joined: Tue Jan 19, 2010 10:03 am
- Location: Cayman Islands
-
- Posts: 39
- Joined: Wed May 18, 2005 7:05 pm
- Contact:
i never have issues with the internal logging working correctly, just the live data when internal logging is active at the same time. It seems that I always have to go to internal logging to record dyno pulls on higher hp cars. The live data stream always likes to freeze up half way through the pull.